CE Approved OLED pluse oximeter Adult oximeter of different colors
fingertip pulse oximeter
Principle of the Pulse Oximeter is as follows: Photoelectric
Oxyhemoglobin Inspection Technology is adopted in accordance with
Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter
can be used in measuring the pulse oxygen saturation and pulse rate
through finger.The product is suitable for being used in family,
hospital, oxygen bar, community healthcare, physical care in sports
(It can be used before or after doing sports, and it is not
recommended to use the device during the process ofhaving sport)
and etc.
• Display Mode:0.96" Dual-color OLED display(blue and yellow)
• Screen Resolution:128*64
• SpO2 Measuring Range:0%~100%, (the resolution is 1%).
• Accuracy:70%~100%:±2% ,Below 70% unspecified.
• PR Measuring Range:30bpm~250bpm, (the resolution is 1bpm)
• Accuracy:±2bpm or ±2% (select larger)
• Measurement Performance in Weak Filling Condition:SpO2 and pulse
rate can be shown correctly when pulse-filling ratio is 0.4%.
SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select
larger).
• Resistance to surrounding light: The deviation between the value
measured in the condition of man-made light or indoor natural
light and that of darkroom is less than ±1%
Item | Green Gift Heart Blood Fingertip pulse oxymeter pluse de dedo
finger oximetro de pulso oximeter |
Measuring Accuracy | 80% to 99% within the range of ± 2%, 70% to 79% within the range of
± 3%, 70% or less is not required |
Resolution | blood oxygen saturation ± 1% |
Measurong range | 70% to 99% |
Display | LCD digital display |
Pulse rate | 30BPM~240BPM Measurement accuracy:±1BPM or ±1% of the measured
value (larger value) |
Scope of application | Finger-clamp pulse oximeter for hospital, home, school, and medical
center testing. |
Response | 3-5 second |
Power source | 3V DC,2x15V AAA batteries |
Main unit weight | Approx. 50g(batteries not induded) |
Main unit size | L57cm x W30mm x H32mm |
Accessories | Instruction manual |
Storage Range | -20℃~55℃/-4℉~131℉
15%-95%RH |
Major Features
1) SpO2 value display
2) Pulse rate value display, bar graph display
3) Pulse waveform display
4) PI value display
5) The display mode can be changed
6) Low-voltage indication: low-voltage indicator appears before
working abnormally which is due to low-voltage
7) Pulse sound indication and over limit indication
Operation Instructions
- Install two AAA batteries into battery cassette before covering its
cover.
- Plug one finger into rubber hole of the Oximeter (it is best to
plug the finger thoroughly) before releasing the clamp with the
nail upwards.
- Press button on the front panel;
- Donot tremble your finger when the Oximeter is working. Your body
is not recommended on moving status.
- Press the button on the front panel, if we want change display
direction;
- Read relevant datum from display screen.
- If there is no signal input, oximeter can shut off automatically;
- Please replace new batteries when OLED indicates the batteries are
in low power.
Shipping
1. We will ship the item within 24 hours after receiving your
payment, except weekend and holiday, kindly leave us your shipping
address and contact number, both are very important, thank you!
2. Expedited Int'l Shipping (heavy items) to worldwide by
FedEx/UPS/DHL(5-10 days), and pls contact us for the shipping rate.
If you have any special requirement, please feel free to contact
our staff immediately, or leave the note in Paypal after your
payment, we will provide you the satisfy shipping.
3. If you haven't received items for 4 weeks, please contact us
immediately.
| A | We usually quote within 24 hours after we get your inquiry. If you
are very urgent to get the price, please call us or tell us in your
email so that we will regard your inquiry priority. |
| Q2 | How can I get a sample to check your quality? |
| A | After price confirmation, you can require for samples to check our
quality. |
| If you need the samples, we will charge for the sample cost. But
the sample cost can be refundable after order confirmation when
your quantity of the order is more about the MOQ. |
| Q3 | What kind of logo files do you accept for printing? |
| A | PDF, Core Draw, Ai. |
| Q4 | Can you do the design for us? |
| A | Yes. We have a professional team having rich experience in design
and manufacturing. Just tell us your ideas and we will help to
carry out your ideas into perfect products. It does not matter if
you do not have someone to complete files. Send us high resolution
images, your Logo and text and tell us how you would like to
arrange them. We will send you finished files for confirmation. |
| Q5 | What about the lead time for mass production? |
| A | Honestly, it depends on the order quantity and the season you place
the order. The lead time is about 15-35 days. Generally speaking,
we suggest that you start inquiry two months before the date you
would like to get the products at your country. |
| Q6 | What is your terms of delivery? |
| A | We accept EXW, FOB, etc. You can choose the one which is the most
convenient or cost effective for you. |
